K11 Wiki

Diagnosis mode activates only when a malfunction is detected, by turning the ingition switch as follows:

1. Turn ignition switch “ON”.
2. After “AIR BAG” warning lamp lights for 7 seconds, turn ignition switch “OFF” within 1 second.
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 three times.
5. Turn ignition switch “ON”. SRS will enter Diagnosis mode, if no malfunction is detected.

After a malfunction is repaired, turn ignition switch “OFF” for at least one second, then back “ON”. Diagnosis mode is returned to User Mode. If Switching Diagnosis mode to User mode is required while malfunction is being detected, turn ignition switch as follows:

1. Turn ignition switch “ON”.
2. After “AIR BAG” warning lamp lights for 7 seconds, turn ignition switch “OFF” within one second.
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 three times.
5. Turn ignition switch “ON”.

Without Consult-II:

After a malfunction is repaired, switch the ignition “OFF” for at least one second, and then back “ON”. Diagnosis mode returns to the User mode. At that time, the self-diagnostic result is cleared.